I have just created a 3D model of my daughters new huge hamster cage. Now I need some simple drawings so I know what parts to cut and how many of each.
Go to the TechDraw workbench and create a new page by clicking the
Insert Default Page button
There are lots of different templates if you choose
Insert Page using Template button just next to the insert default page button.
Now we have an empty page, but we need to view something. Use the tabs in the bottom to go back to the 3D view, make sure you are in
Top view. The rotation of this view is what is used when you import a view into a page.
and select the
Bottom part in the treeview.
Use the tabs again to go back to the Page view and click
Insert a View button
By default the scale is 1:1 so the view of the part will be huge, select the View under the Page in the treeview and change the scale. I have changed the scale to 0,1. If it does not update you may need to hit
Ctrl + r to recompute the View.
It's always nice with a pretty header information on a drawing, so lets change those as well. Click the colored field to get an edit box for that field.
The drawing is not usefull yet, it just shows a top down view of our bottom part. Lets add some dimensions so we now how to measure and cut the parts.
Select the top line of the square part in the view
Insert horizontal dimension button
Drag it to a nice place
Select the line on the left side
Insert vertical dimension button
Drag it to a nice place
I did not bother to create a view with dimensions for the thickness, I just add a short text at the top for this.
Add annotation button to create an annotation field for text.
Click the three dots in the property window for the
Now you can enter some text, new lines will be visible in the annotation field if used in the tiny text editor
You can drag around the view and annotation frames so they don't overlap and the drawing looks a bit better.
When you are satisfied with your new drawing you can hide the frames by clicking the
Turn view frames on/off button
and the frames will be hidden
Like before, I will not go into details for every page and part. But you can see all my drawings for my cage, short description for each
Second page is for my sides and just like the bottom I added the text on the top left for the plywood thickness. Then I added the
2x Sides text in the part to indicate I need to cut two of those
Same as before, the plywood sheet thickness at the top left of the page. On this page I could fit both the back side and the top on the same page. Used annotations to add the text in the middle of each part so I can identify them.
For the support frames I wrote the wood beam size I was going to use, this way I only have to add the length dimension for each part. Added annotation text to describe how many of each I need.
The lid frame of the cage used the same wood beam size as the support frames, I just wrote it at the top left like before. Then I imported the two "finished" lid frames and just added the meassure for the length of the parts I need to cut. Using annotation on the side for a small summary for how many of each part I will need to cut. The "finished" lid frame drawings will act as a simple guide on how to assemble them.
Finally a drawing for the acrylic glass front, as before I wrote the acrylic glass thickness at the top left. Then I added the dimensions for length and height of the acrylic glass. I could have added lots of dimensions for the holes and spacing between the holes I made. But I just need to now the size of the hole and a guide on where to put them.